Virtual pan, tilt, zoom camera

Virtual PTZ Board Camera
with EX-SDI, HD-SDI & CVBS

  • Virtual PTZ via VISCA or I²C Commands
  • 1/3" 2.4MP Image Sensor
  • 1080p 60/50fps 30/25fps
    ▪ 1080i 60/50 fps
    ▪ 720p 60/50/30/25 fps
  • Optical zoom equivalency is achieved to @2.7x magnification as you
    reduce from a 2 MP resolution image down to full screen VGA resolution
  • Digital Zoom up to 33x
  • Real Time True WDR
  • CVBS analog displayed in 16:9 or Native 4:3 (Cropped)
  • Controls via VISCA or I²C or UART
  • Extended SDI
    ▪ Transmissions to 500m (1,600 ft.)
    ▪ Latency <1 fps.
  • HD-SDI
Request More Info
Electrical
Image Sensor 2.4MP 1/2.86" Panasonic MN34422PL progressive scan sensor
Active Pixels 1944 (H) x 1092 (V)
Frame rate 60/50fps @ Full Resolution
Resolution Digital 1080p (30/25 fps)
Analog* >700 TVL (NTSC/PAL) *D-WDR mode only
Min. Illumination DSS: 1/30s Color: 0.5 lux, B&W: 0.1 lux
1/7.5s: Color: 0.02 lux, B&W: 0.025 lux
Gain Control (AGC) Off/ On
Exposure Auto/ Manual
Mirror/Flip Off/ H (mirror)/ V (flip)/ H&V
Video Format EX/HD-SDI: 16:9
CVBS: 16:9 or 4:3 selectable
Video Output EX-SDI : 270Mbps visually lossless compression thru 75Ω BNC connection
HD-SDI : 1.485 Gbps, (SMPTE 292M) thru 75Ω BNC connection
CVBS** : NTSC/PAL standard, 1Vp-p @75Ω composite
** CVBS has output buffer
WDR Real time to 120dB (HD-SDI only)
Digital 8x (HD-SDI and analog)
Regions of Interest (BLC) within WDR
Power 5VDC +/- 0.1V, polarity protection
Power Consumption <1.4 watts
Environmental
Operating Temperature -20°C - 50°C (04°F - 122°F)
Operating Humidity 30%RH – 80%RH
Communication
VISCA Camera control via VISCA commands I²C or keyboard
Interface 3.3: UART, I²C or keyboard
Zoom Controls *** (VISCA, I²C)
  Preset zoomMotion
detect zoom
*** OSD cannot be used for zooming
Mechanical
Dimensions WxHxD 22mm x 26mm x 24mm (0.87" x 1.02" x 0.94") (with heat sink and lens mount)
Lens Mount Metal M-12 board
HD Transmission Distance
EX-SDI 500m (1,600ft.)
24PF2.45W dimensions
VISCA Camera Controller (VISCA command set required)
SFT-17431
rev A compressed folder

The Videology Visca-Controller Graphical User Interface (GUI) Application.

The GUI is a Microsoft WindowsTM compatible utility which provides a convenient way to perform control of Videology cameras equipped with a VISCA communication interface.

VISCA Command Sets
SFT-20099
rev A compressed folder

The descriptor file(s) (csv-file type), which describes the typical contents and characteristics of the VISCA Command (and Inquiry) messages of interest.

Optional Cables
60C1203 5pin Molex to flying leads
60C1182 H-FL to BNC cable (8")
Accessories
Control Board   60MC0001
Transmitter/
Receiver Packages
Coax 60TR0001 (270MHz ver 1.0)
UTP 60TR0004 (270MHz ver 1.0)
UTC 60TR0003 (270MHz ver 1.0)
Repeater Coax only 60RP0001 (270MHz ver 1.0)
Ordering Information
24PF2.45W-IN NTSC camera with Pan/Tilt/Zoom commands via I²C
24PF2.45W-IP PAL camera with Pan/Tilt/Zoom commands via I²C
24PF2.45W-VN NTSC camera with Pan/Tilt/Zoom commands via VISCA
24PF2.45W-VP PAL camera with Pan/Tilt/Zoom commands via VISCA
24PF2.45W-KN NTSC camera with Keyboard/OSD commands (future option)
24PF2.45W-KP PAL camera with Keyboard/OSD commands (future option)