High Definition 1.3 Megapixel B&W Single Board Camera
with USB Video Output

24B1.3XUSB-C
- Progressive scan, 1.3 megapixel CMOS sensor (square pixels)
- Sensor is optically centered within lens mount holes
- Streaming video or single frame capture via hardware/software
- Triggerable instantaneous snap shots (model 24B1.3XUSB-V)
- 24fps at full 1280 x 1024 resolution uncompressed video
- Simplified cabling - video, power and full camera control over a single USB cable
- Extended integration time (>0.5 sec.)
- Complete SDK available
Software
- USB 2.0 viewer software and Microsoft Digitally Certified
- WDM Device Drivers for 32bit and 64bit Windows operating systems
- DirectX/DirectShow compliant
- TWAIN compliant
- Select Linux driver available
Electrical | |
---|---|
Image Sensor | 1/2" CMOS 6.8mm x 5.4mm array |
Active Pixels (HxV) | 1280 x 1024, 5.2um square pixels |
Frame Rate | 24 fps at 1280 x 1024 un-compressed, 30fps at 640 x 480 un-compressed |
Sensitivity | <1.0 Lux |
Signal To Noise Ratio | > 45dB |
Gain Control | Manual gain selectable via software |
Synchronization | Internal (X-tal controlled) |
Shutter Mode | Electronic rolling shutter |
Shutter Speed | Selectable via software (1/2 – 1/5000 sec.) |
Scan Mode | Progressive scan |
Control Communication | Camera control via USB bus |
Mirror Mode | Selectable via software |
Dynamic Range | 68 db |
Video Output | USB 2.0 (not USB 1.1 compliant) |
Power Supply | 5VDC via USB bus |
Power Consumption | <110mA, <0.6W |
Still Capture | Via hardware or software (Streaming or single frame) |
Environmental | |
Operating Temperature | -15°C ~ 55°C (5°F ~ 131°F) |
Operating Humidity | 20% to 93% RH, non-condensing |
Storage Temperature | -25°C ~ + 70°C (-13°F ~ 158°F) |
Storage Humidity | Max 98% RH |
Packaging | ESD safe package |
Mechanical | |
Dimensions WxHxD | 32mm x 32mm x 7.7mm (1.26" x 1.26" x 0.3") |
M-12 mount depth is 20.1mm (0.79") | |
CS mount depth is 16.8mm (0.66") (not including outer lens thread) | |
Weight | <100g (3.5oz) |
Lens Mounts | Replace "X" in model number with desired lens mount option: |
Example: To select an M-12 Board Mount Change 24B1.3XUSB-C to 24B1.35USB-C | |
5 = M-12 board mount |
|
8 = CS mount | |
Lenses (Recommended) | 32SJ0818LD 8mm f1.8 |
30SJ0818LD 8mm f1.8 | |
Connectors | USB board connector: (6 pin) power & data |
Safety Standards | RoHS |
Optional USB 2.0 Cable | 60C1062 | 8 ft. (2.4384m) |
60C1062-1 | 40 in. (1.016m) | |
60C1062-2 | 12 in. (304.8mm) | |
60C1062-3 | 6 in. (152.4mm) | |
60C1062-4 | 15 ft. (4.572m) |
Viewer (included) SFT-07019 |
|
|
SDK (optional) SFT-07019-SDK |
Complete software development kit and support for OEMs | |
Minimum System Requirements | Hardware | Pentium IV 2.3GHz +, 1GB hard drive, Intel USB 2.0 Host controller |
Software | Windows 7, 8, 10 32 bit and 64 bit | |
Windows Vista 32 bit and 64 bit | ||
Windows XP Service pack 2 +, DirectX 9.0c or above | ||
Software Downloads | ||
---|---|---|
SFT-07019 rev 1.0.160 ![]() |
Latest USB 2.0 viewer software and drivers for 32bit and 64bit Windows operating systems (not Microsoft Digitally Certified) | |
SFT-07019-WHQL rev 1.0.129S ![]() |
Microsoft Certified USB 2.0 viewer software USB 2.0 viewer software and Microsoft Digitally Certified WDM Device Drivers for 32bit and 64bit Windows operating systems. | |
SFT-10011 rev 2.1.25 ![]() |
TWAIN Data Source for Videology USB Cypress cameras. | |
SFT-15002 rev 77 ![]() |
.NET Wrapper DEMO software |
1.3 Megapixel CMOS Family
24B1.3XUSB-L | ![]() (minimum quantity required) |
24B1.3XUSB-V | ![]() |
24C1.3XDIG | ![]() |
24C1.3XUSB | ![]() |
24C7.38USB | ![]() |
24C7.38USB-F-L8 | ![]() |