USB Camera

1/3" Pixim® Seawolf® Mini USB Board Camera

With Wide Dynamic Range

  • Click here for high resolution image
  • Click here for high resolution image
  • Click here for high resolution image
  • Click here for high resolution image
20C20XW-USB

20C20XW-USB | 21C20XW-USB

  • 1/3" CMOS Pixim® Seawolf® progressive scan sensor
  • Dynamic range to 120dB provides brilliant color detail within both shadows and brightest light scenes
  • Miniature rugged 32mm double board
  • Robust USB 2.0 operation via Videology drivers
  • 690TVL resolution
  • Low 0.1 lux sensitivity
  • Metal CS and M-12 lens mounts
  • Digital Pan/Tilt/Zoom (8x)
  • Day/Night (future)

USB Software
Drivers developed by Videology operate seamlessly on all popular Windows operating systems

  • SDK available
  • Microsoft Certification in Process
  • DirectX/DirectShow and TWAIN compliant
Electrical
Image Sensor 1/3" CMOS Pixim® Seawolf®
Effective Pixels (H x V) 758 x 540
Pixel Size 7um x 7um
Shutter Mode Global
Horizontal Resolution 690TVL
Aspect Ratio 4:3
Sensitivity 0.1 Lux @ color, 0.01 lux @ B&W
White Balance Range 2,000K - 11,000 K
Dynamic Range 120dB (max), 102dB (typical)
Synchronization Internal
Iris Manual/DCAI (future)
Video Output USB 2.0 (CVBS/BT656 optional model)
Signal to Noise Ratio > 50dB
Supplied Voltage 5VDC -12VDC +/- 10% or 5VDC via USB bus
Power Consumption < 1.3 W
OSD Board Controls
Scanning System 2:1 Interlace default/Progressive
Frame Rate 30fps
White Balance Control AWB (default)
Motion Detection Yes
Day & Night Auto (default)
Communication RS-485 (future option)
Image Flip Default off
Mirror Mode Default off
AGC Control Auto (default)
Zoom Digital (8x)
Environmental
Operating Temperature -10°C ~ 50°C (14°F ~ 122°F)
Operating Humidity 30% ~ 90%
Storage Temperature -30°C ~ 80°C (-22°F ~ 176°F)
Storage Humidity 85%RH
Mechanical
Dimensions WxHxD 32mm x 32mm x 18.2mm (1.26" x 1.26" x 0.72")
Weight 55.5g (1.95oz)
Lens mounts Replace "X" in model number with desired lens mount option:
Example: To select an M-12 Board Mount Change 20C20XW-USB to 20C205W-USB
5 = M-12 board mount
8 = Metal CS
Lens See our lenses at www.videologyinc.com/lenses
20C20XW-USB dimensions

Note: Camera is not USB 1.1 compliant

Viewer (included)
SFT-07019
  • WDM device drivers
  • DirectX/DirectShow compliant
  • TWAIN compliant (requires driver installation)
SDK (optional)
SFT-07019-SDK
Complete software development kit and support for OEMs
Minimum System Requirements Hardware Pentium IV 2.3GHz +, 1GB hard drive, Intel USB 2.0 Host controller
Software Windows 7 32 bit and 64 bit
Windows Vista 32 bit and 64 bit
Windows XP Service pack 2 +, DirectX 9.0c or above
Software Downloads
SFT-07019
rev 1.0.151 compressed folder
Latest USB 2.0 viewer software and drivers for 32bit and 64bit Windows operating systems (not Microsoft Digitally Certified)
SFT-07019-WHQL
rev 1.0.129S compressed folder
Microsoft Certified USB 2.0 viewer software USB 2.0 viewer software and Microsoft Digitally Certified WDM Device Drivers for 32bit and 64bit Windows operating systems.
SFT-10011-TDS
rev 2.1.18 compressed folder
TWAIN Data Source for Videology USB Cypress cameras.
Optional 60C1147 10ft. (3.048m) Mini USB 2.0 Cable
60C1062
8ft. (2.4384m) USB 2.0 Cable
60ZRC10 OSD Key Pad
60C1161 10" OSD cable
Optional Models
20/21C20XW Pixim® Seawolf®, 32mm single board, composite video output
20/21C20XW-DIG Pixim® Seawolf®, 32mm single board, digital video output
20/21C20XWX-USB Pixim® Seawolf®, 32mm double board, USB video output