Print Data Sheet
Print Instruction Manual
 
Back To List Back To List

High Resolution CCTV Camera With S-Video Output
20D779 / 21D779   Series Features
  • Outputs: CVBS & S-Video
  • I²C Control: Mirror, Gamma, Contour, Gain, Shutter
  • HD/VD Sync Out
  • H&V Sync In or Crystal Lock
  • White Balance: Auto & Fixed, Push To Set
20D779

20D779 dimensions

Technical Specifications
Electrical Specifications
20D779 NTSC
21D779 PAL
CCD Sensor
1/3” IL Color CCD
Active Pixels (HxV)
768 x 492
752 x 585
Horizontal Resolution (TVL)

450 TVL CVBS
490 TVL YC
Sensitivity
0.5 lux
Signal To Noise Ratio
>46dB
Gamma
0.45 default or 1 selectable via dip switch or I²C bus
Gain
Automatic (26 dB default) Manual / Fixed via software
Synchronization
Internal or H&V lock, Default on, HD/VD Sync out
Back Light Compensation
Selectable via software
White Balance
Automatic (default)
3 Fixed modes via software
Push to set via hardware or software
Shutter Speed (fixed)
8 Fixed speeds via hardware
11 Speeds via software
Automatic from 1/60 to 1/20,000
Automatic from 1/50 to 1/20,000
Contour Enhancement
Selectable Horizontal and Vertical via software/ sip switch
Mirror Mode
On/Off Selectable via software/ dip switch
Iris Signal
Electronic
Iris Controls
Electronic (default), fixed shutter speeds (8 values)
Video Output
Composite 1Vp-p video (75 Ohms)
Y/C (S-Video)
Power Supply
8-16 VDC (12VDC optimal)
Power Consumption
< 2.4W
Environmental Specifications (Internal)
Ambient Operating Temp.
-15º to +55º C
Storage Temperature
-25º to +70º C
Mechanical Specifications
Dimensions (WxHxD)
50mm x 60mm x 62.5mm
Lens Mount
CS Mount
Accessories Optional
60PR12DC800 12VDC regulated power supply
60VZZ0030C Mount with adapter ring
mounting plate - top or bottom mountable

DC in/control communication kit available on request

20D779 pin connector drawing
All data subject to change without notice.