Print Data Sheet
Print Application Note
Print Application Note For 2XVC365050 Series
Back To List Back To List

High Resolution B&W CCD Board Camera
20VC36 / 21VC36 Series Features
20VC36
  • Low light sensitivity < 0.01 lux, near IR sensitive
  • Mirror mode
  • AGC or manual gain control
  • Iris output (video iris)
  • AC or DC coupled video output
  • Available with integrated board lens, pinhole lens and CS-mount
  • Audio option

    * Note: Equipment with audio recording capabilities is intended to be used only for legal and proper purposes. The customer assumes all liability related to legal and proper use per VIS waiver FOR-03-032.
20VC36 schematic
Technical Specifications
Electrical Specifications
20VC36 EIA
21VC36 CCIR
CCD Sensor
1/3” IT CCD, mounted on PCB
Active Pixels (HxV)
512 x 492
512 x 582
Horizontal Resolution
> 380 TVL at center of picture
Vertical Resolution
420 TVL
460 TVL
Sensitivity
<0.01 lux F1.2 (50 IRE)
< 0.5 lux, integrated lens
< 3 lux, pinhole
Signal To Noise Ratio
> 48 dB AGC off
Gamma
fixed 0.45
Gain
Automatic or manual via DC voltage
Synchronization
Internal
Back Light Compensation
Yes (optional switch off by jumper)
Flickerless Mode
Selectable via PCB jumper
Contour Enhancement
Implemented
Mirror Mode
Selectable on module PCB
Iris
Electronic (can be switched off by jumper)
Video Output
1Vp-p composite video (75 ohm)
Power Supply
10-12VDC (regulated recommended)
Polarity protected
Power Consumption
<1. 4W
Environmental Specifications (Internal)
Ambient Operating Temp.
-20º to +55º C
Storage Temperature
-25º to +70º C
Mechanical Specifications
Dimensions (WxHxD)
32mm x 32mm x 26mm
Lens Mount Metal CS: 20/21VC3617C (rear connector)
Metal M-12 board: 20/21VC3617 (front JST connector)
Metal M-12 pinhole: 20/21VC360250 (rear amp connector)
Interfaces Board connector: Power (+12V), Gnd, Video
All data subject to change without notice.