High Resolution USB 2.0 Color Board Camera
20K15XUSB-C / 21K15XUSB-C Features
- All-digital design uses camera board's digital (D1) output for input to USB board
- CCD sensor provides optimal image quality
- USB 2.0 bus provides power to camera
- Complete SDK available
Software
- USB 2.0 viewer software and Microsoft Digitally Certified WDM Device Drivers for 32bit and 64bit Windows operating systems
- DirectX/DirectShow compliant
- TWAIN compliant
- Select Linux driver available
| Electrical |
| CCD Sensor |
1/4" Sony Ex-View® CCD |
| Active Pixels (HxV) |
768 x 494 (NTSC)
752 x 582 (PAL) |
| Viewer Display |
USB 2.0, 30fps |
720 x 480 pixels max (NTSC)
720 x 576 pixels max (PAL) |
| Sensitivity |
< 0.5 Lux |
| Signal to Noise Ratio |
> 48 dB (AGC off) |
| Gamma |
0.45 default (1.0 via Software) |
| Gain Control |
Automatic 36 dB (AGC default) or Fixed options via software |
| Scan Mode |
Interlaced / Non Interlaced (selectable via Software) |
| Mirror Mode |
Selectable via software |
| Synchronization |
Internal |
| Back Light Compensation |
Default on (selectable via software) |
| Contour Enhancement |
Default on |
| Iris Control |
CCD Iris default |
| White Balance Mode |
AWB auto white mode, Fixed modes selectable via software |
| Shutter Speeds |
14 fixed speeds via software,
Automatic from
1/7.5 to 1/100,000 (NTSC),
1/6.5 to 1/100,000 (PAL) |
| Control Communication |
Camera control via USB bus |
| Power Supply |
5VDC via USB bus |
| Power Consumption |
< 1.3 W |
|
| |
| Environmental |
| Operating Temperature |
-15°C ~ 55°C (5°F ~ 131°F) |
| Operating Humidity |
20 up to 93%RH |
| Storage Temperature |
-25°C ~ 70°C ( -13°F ~ 158°F) |
| Storage Humidity |
Up to 98%RH |
| Lifetime |
MTBF > 150000 |
| Packaging |
ESD safe package |
|
| |
| Mechanical |
| Dimensions WxHxD |
26mm x 22mm x 16mm (1.02" x 0.86" x 0.62") (without lens mount)
|
| Weight |
19g (0.67oz) (w/ M-12 mount) |
| Lens mounts |
Replace "X" in model number with desired lens mount option: |
| Example: To select an M-12 Board Mount Change 20K15XUSB-C to 20K155USB-C |
2 = M-12
pinhole mount
5 = M-12 board mount
8 = CS mount |
| Connectors |
Camera to USB board: Board to board connector |
| USB board connector: (6 pin) power & data |
|
| |
| Safety Standards |
|
Note: Camera is not USB 1.1 compliant
Viewer (included)
SFT-07019 |
- WDM device drivers
- DirectX/DirectShow compliant
- TWAIN compliant (requires driver installation)
|
SDK (optional)
SFT-07019-SDK |
Complete software development kit and support for OEMs |
| Minimum System Requirements |
Hardware |
Pentium IV 2.3GHz +, 1GB hard drive, Intel USB 2.0 Host controller |
| Software |
Windows 7 32 bit and 64 bit |
| Windows Vista 32 bit and 64 bit |
| Windows XP Service pack 2 +, DirectX 9.0c or above |
Software Downloads |
SFT-07019
rev 1.0.136  |
Latest USB 2.0 viewer software and drivers for 32bit and 64bit Windows operating systems
(not Microsoft Digitally Certified) |
SFT-10011-TDS
rev 2.1.18 |
TWAIN Data Source for Videology USB Cypress cameras. |
|
| Accessories |
| Optional USB 2.0 cable |
60C1062 |
8 ft. (2.4384m)
|
| 60C1062-1 |
40 in. (1.016m)
|
| 60C1062-2 |
12 in. (304.8mm)
|
| 60C1062-3 |
6 in. (152.4mm)
|
| 60C1062-4 |
15 ft. (4.572m) |
|
| |
| Complementary Models |
| 20K13XUSB-C |
 High resolution B&W USB 2.0 board camera |
| 20K14XUSB-CDN |
USB 2.0 Day / night color board camera
Note: Day/Night optical filter (or no filter) options for maximum sensitivity in B&W mode |
| 20K15XUSB-C |
High resolution color USB 2.0 board camera |
|
Data sheet