Products

Software

Close-up images of the exiting suspect
Ideal focus and sensitivity
Clear view from 5 inches to 20 feet away from door
Proprietary camera lever has ±15° lateral adjustment, offering 48° FOV. Installation choice of left or right door mullion can optimize the view for very wide exit doors.
No lens distortion
Glass plate protects lens from harsh cleaning materials
Cable ready for top entry of 5VDC power (or 24VAC with adapter)
Brushed stainless cover plate

Electrical

	20K152-F High Resolution	20K142-F Standard Resolution
CCD Sensor	1/4" IL CCD
Resolution	520 TVL	400 TVL
Sensitivity	< 0.5 lux	< 0.25 lux
Signal to Noise Ratio	50 dB (AGC off)
Gamma	0.45 default (1.0 selectable via software)
Gain Control	Automatic 36 dB (AGC default) or Fixed options via software	Automatic 36 dB (AGC default) or Fixed options (Factory selectable)
Scan Mode	Scan Mode Interlaced/non interlaced (Factory selectable)
Mirror Mode	Default off (Factory selectable)
Synchronization	Synchronization Internal
Back Light Compensation	Default on (Factory selectable)
White Balance Mode	AWB auto white balance mode, Fixed modes (Factory selectable)
Contour Enhancement	Default on
Iris Control	CCD Iris default
Shutter speeds	Automatic from 1/60 to 1/100,000 (NTSC) Automatic from 1/50 to 1/100,000 (PAL) 14 fixed speeds (Factory selectable)
Video Output	Composite 1Vp-p CVBS (75 ohms)
Power Supply	* 5VDC ±5%
	* CAUTION Not polarity protected at board level. Using the supplied connector mitigates this risk of flying leads
Power Consumption	< 0.8W

Environmental

Mechanical

Included	Cover plate (brushed stainless)
	2.1mm power jack & shielded BNC video cable
Not Included	60PBIP5	24VAC to 5VDC adapter
	60P5VDC	5VDC power supply