USB 2.0 High Resolution B&W CCD Board Camera With Microsoft Certified Drivers

  • Click here for high resolution image
  • Click here for high resolution image
  • Click here for high resolution image
  • Click here for high resolution image
20K13XUSB

20K13XUSB / 21K13XUSB Features

  • All-Digital Design Uses Camera Board’s Digital (D1) Output For Input To USB Board
  • Sony Ex-View® Provides Highest Sensitivity & Performance
  • USB 2.0 Bus Provides Power To Camera
  • Camera Control Over USB
  • Software
    • WDM device drivers Digitally signed by Microsoft under Windows XP
    • DirectX compliant
    • TWAIN compliant

Videology's WDM drivers are digitally signed by Microsoft® certifying the software has been tested with Windows XP and has not been altered since testing, enabling compatibility with your applications.

Electrical
CCD Sensor 1/4" Sony Ex-View® CCD
Active Pixels (HxV) 768 x 494 (EIA)
752 x 582 (CCIR)
Viewer Display USB 2.0, 30fps 720 x 480 pixels max (EIA)
720 x 576 pixels max (CCIR)
USB 1.1, 30fps 320 x 240 pixels max
Sensitivity < 0.005 lux, near IR sensitive
Signal to Noise Ratio > 48 dB (AGC off)
Gamma 0.45 default (1.0 via Software)
Gain Control Automatic 36 dB (AGC default) or Fixed options via software
Scan Mode Interlaced / Non Interlaced (selectable via Software)
Mirror Mode Selectable via software
Synchronization Internal
Back Light Compensation Default on (selectable via software)
Contour Enhancement Default on
Iris Control CCD Iris default
Shutter Speeds 14 fixed speeds via software,
Automatic from 1/60 to 1/100,000 (EIA), 1/50 to 1/100,000 (CCIR)
Control Communication Camera control via USB bus
Power Supply 5VDC via USB bus
Power Consumption < 1.3 W
 
Environmental
Operating Temperature -15°C ~ 55°C (5°F ~ 131°F)
Operating Humidity 20 up to 93%RH
Storage Temperature -25°C ~ + 70°C ( -13°F ~ 158°F)
Storage Humidity Up to 98%RH
Lifetime MTBF > 150000
Packaging ESD safe package
 
Mechanical
Dimensions WxHxD 26mm x 22mm x 16mm (without lens mount)
Lens mounts Replace "X" in model number with desired lens mount option:
Example: To select an M-12 Board Mount Change 20K13XUSB to 20K135USB
2 = M-12 pinhole mount
5 = M-12 board mount
8 = CS mount
Connectors Camera to USB board: Board to board connector
USB board connector: (6 pin) power & data

Pin Outs

20K13XUSB dimensions
Viewer (included)
SFT-04040		 Software for entire product family:
  • WDM device drivers Digitally signed by Microsoft under Windows XP®
  • DirectX compliant
  • TWAIN compliant on Windows XP
Full camera DSP control available for OEMs
Data Rate 480 Mb/sec. (maximum)
Distance 5m with repeater 30m
SDK (optional)
SFT-04040-SDK		 Complete software development kit and support for OEMs
 
Software Downloads
SFT-04040
rev 1.1.2.3 compressed folder		 USB 2.0 viewer software and drivers for 32bit Windows operating systems
SFT-10028
rev 1.0.0 compressed folder		 USB 2.0 drivers for 64bit Windows operating systems
Note: this is the driver only, please also download SFT-04040 for the viewer software.
20B14XUSB 20B14XUSB USB 2.0 dual board camera
20K15XUSB 20K15XUSBHigh resolution, USB 2.0 dual board