Print Documents Print Data Sheet
Print Instruction Manual
 
Back To List Back To List

CCD Double Board Camera

20E407 / 21E407
20E417 / 21E417 		Series Features
20E407
  • Numerous Features Controllable Via Dip Switches
  • Low Light Sensitivity (<0.5 lux)
  • Back Light Compensation and Flicker-less Mode
  • Auto White Balance and Color Tracking
  • Available in Standard and High Resolution
  • Composite Video Output (Y/C Optional)
20E407 dimensions
Technical Specifications
Electrical Specifications
20E407/21E407
20E417/21E417
CCD Sensor
1/3” Sony Interline CCD
Active Pixels (HxV)
20E407 NTSC
21E407 PAL
20E417 NTSC
21E417 PAL
768 x 492
752 x 582
512 x 492
512 x 582
Horizontal Resolution (TVL)
>460 TVL
>330TVL
Sensitivity
<0.5 lux
Signal To Noise Ratio
>46dB
Gamma
Default 0.45/selectable settings
Gain
Automatic/fixed (specified gain), selectable
Synchronization
Internal / line lock
Back Light Compensation
Selectable on/off
White Balance
Automatic/fixed setting, selectable/ push to set
Shutter Speed
From /50 (/60 EIA) to <1/10,000 sec, Fixed shutter speed
Iris
Electronic iris, DC iris
Video Output
1Vp-p baseband video (75 ohm)
Power Supply
12VDC +/- 10%
Power Consumption
1.5W
Environmental Specifications (Internal)
Ambient Operating Temp.
-10° C ~ 55° C (14° F ~ 131° F)
Ambient Operating Humidity
90% non-condensing
Storage Temp.
-25° C ~ 70° C (-13° F ~ 158° F)
Storage Humidity
95% non-condensing
Mechanical Specifications
Dimensions WxHxD 38mm x 38mm x 30mm (1.49” x 1.49” x 1.18”) double board
Available board lenses 2.9, 3.6, 4.3, 6.0, 8.0, 12.0
Varifocal lens 4-9mm, 2.6-5.6mm
When ordering, add suffix to
model Number		 VA Fixed iris 4-9mm
VB  
WA Varifocal fixed iris 2.6-5.6mm
WB  
Lens mount

 20E407/ 21E407 M12 Board lens Mount
20E417/ 21E417  
20E409/ 21E409 C/CS Lens Mount
20E419/ 21E419  
Interfaces Board connector/ power & video out
Ground
Line lock
Accessories Optional 24VAC power board
Note: Serial Interface or YC options are special requests
All data subject to change without notice.