Print Data Sheet
Print Application Note
 

Back To List Back To List

High Resolution B&W CCD Board Camera With Digital & Analog Output

20D386 / 21D386
20D389 / 21D389
Series Features
20D386 20D389
  • Asynchronous Reset, Single & Double Pulse Mode
  • Digital & Analog Outputs
  • High Resolution 570 TVL
  • H&V Sync, HD/VD
  • Interlaced / Non-interlaced
  • Mirror Mode
  • Frame Rate Option (75 Hz)
  • Computer Controllable via I²C
  • Near IR Sensitive

20D386 20D389 schematic

Technical Specifications
Electrical Specifications
20D386 20D389 EIA
21D386 21D389 CCIR
CCD Sensor
1/3’’ IL CCD, Sony Ex-View®
Active Pixels (HxV)
768 x 492
752 x 582
Horizontal Resolution
570 TVL CVBS
Sensitivity
.001 lux (30 IRE) F1.2, lens transmission 80%,
Lens reflection 75%, near IR sensitive
Signal To Noise Ratio
> 54 dB (AGC off)
Gamma
Default 0.45, 1.0 selectable via software
Gain
Automatic (36 dB default), Manual/fixed via software
Synchronization Input
Internal crystal coupled, H&V lock, Line lock
Synchronization Output
H Ref (Hor. Sync) V Ref. (Vert Sync),
Pixel clock for digital video asynchronous reset,
Single & double pulse mode
Back Light Compensation
Off default, on selectable via software
Shutter Speed
Automatic 1/50 to 1/100,000
Automatic 1/60 to 1/100,000
8 Fixed speeds via hardware, 11 Speeds via software
Scan Mode
Interlaced default, non-interlaced,
75 Hz option specific model, - see Application_Note
Contour Enhancement
Default on, selectable horizontal and vertical via software
Iris
CCD Iris default, video iris @ 1Vp-p,
DC iris output via option board (60PB24VDL)
Video Output
Analog Composite 1Vp-p video (75 ohms)
Digital 8 Bit luminance
Power Supply
12VDC, +3V / -4V
Power Consumption
<1.5 W

Environmental Specifications (Internal)
Ambient Operating Temp.
-15º to +55º C
Storage Temperature
-25º to +70º C

Mechanical Specifications
Dimensions (WxHxD)
42mm x 42mm x 13.4mm
Lens Mount 20D386 /
21D386
Metal M-12 board lens mount with reference plate 12mm
diameter, 0.5mm pitch
20D389 /
21D389
Metal CS mount with reference plate: Optional C mount with interface ring 60VZZ0030
Interfaces Analog
13 Pole AMP
Digital
24 pole flex foil connector
Software control program available via I²C. Open architecture CPLD
allows application specific programming interfaces.
Refer to Application Note at top
Spectral response curve chart
All data subject to change without notice.