Print Data Sheet
Print Instruction Manual
 
Back To List Back To List

Blue Sky Series 1/3” CCD Color Board Camera
20D11X / 21D11X Series Features
20D11X, 21D11X
  • 1/3” Color CCD
  • 0.39 Lux Sensitivity
  • 38mm x 38mm Single Board Camera
  • DC Auto Iris
  • Options
    • Balanced Video Output For CAT5/CAT6 Transmission Available To High Volume OEMs
20D11X dimensions
Technical Specifications
Electrical Specifications
20D11X NTSC
21D11X PAL
Image Sensor
1/3” Sony IL CCD
Picture Elements
512 x 492
500 x 582
Resolution
330 TVL
Sensitivity
0.39 Lux (30 IRE) f1.2
0.75 Lux (50 IRE) f1.4
Signal To Noise Ratio
>46 dB (AGC off)
Gamma
0.45
Gain Control
AGC 36dB
Synchronization
Internal (crystal controlled)
Scan Mode
Interlaced
Backlight Compensation
On
White Balance
AWB
Contour Enhancement
On
Iris Controls
Electronic/DC auto iris (auto detect)
Video Output
Composite 1Vp-p CVBS (75 ohms)
Balanced video output option @ 100 ohms (20D11XB)
Power Supply
+12VDC (+/- 10%)
Power Consumption
< 1.0W
Environmental Specifications (Internal)
Operating Temperature
-15° C ~ 55° C (5° F ~ 131° F)
Storage Temperature
-30° C ~ 80° C (-22° F ~ 176° F)
Operating Humidity
20 to 93% RH
Storage Humidity
Up to 98% RH
Lifetime
MTBF >150000 hours
Packaging
Metalized, conductive bags
Warning: Avoid aiming the camera at the sun or other extremely bright lights.
The CCD image sensor may be damaged if exposed to very bright objects.
Mechanical Specifications
Dimensions (WxHxD)
38mm x 38mm x 18.14mm (1.5” x 1.5” x 0.71”)
Weight
9.5g (0.021 lbs)
Lens mount
Replace “X” in model number with desired lens mount option:
Example:
Change 20D11X to 20D115 to select an M-12 Board Mount.
8 = Metal CS Board
5 = Metal M-12 Board
6 = Metal M-14 Board
2 = Metal M-12 Pinhole
cs mount
board mount
pinhole mount
Accessories
Cable (J4)
60C1026 3-pin molex unterminated
Power Board (optional)
60PB24VS 24VAC board (42mm x 42mm)
Models
20/21D11XB
Balanced video output available to high volume OEMs
20/21D11XA
Audio in/out option available to high quantity OEMs
   
X = lens mount option (refer to Mechanical)